Dry type Cast Resin Transformers SCB11, 3 Phase /20KV, For Commercial Center
Product Features for H Class20KV high frequency dry transformer
When the grid voltage is 20kv or 10kv, the transformer in this series can control the connection
status between two windings on high voltage coil in each phase via conversion device, and
realize voltage conversion through series or parallel connection without changing the output
voltage, thus enabling one transformer to connect with two electrical voltage systems like
10kv or 20kv asynchronously, where the transformer acts as a transition of upgrading the grid
voltage from 10kv to 20kv. In this way, it can achieve repeated investment reduction, efficient
conversion, and stable performance.
Related photos:
Warehouse
Our team
With advanced design and manufacture technology, rational structure and advanced formation of material, strict and perfect test technology, dry type transformer with thin insulation of casting resin has the following features:
1.Hardly inflammable, hardly bursting, causing no pollution.
2.Little partial discharge
3.High moisture-proof level.
4.High mechanical strength and good heat stability.
5. High insulation level
6. High capacity of overload because of high capacity of heat dissipation.
7.Low loss, small volume and light weight
8.High economic properties
Service conditions
Altitude: ≤1000m
Ambient temperature: ≤40℃
If application in special condition, contact the manufacturer to find a customized solution.
Any interest, pls feel free to contact:
Product Tags:
|
|
Cast Resin Dry type power Transformers SCB11, For Commercial Center Images
|
